Gates Premium Drive Belt for Polaris Snowmobiles
Belt description:
- Napa G-Force - 46C4387
- New and Improved G-Force C12 Line
- Polaris Snowmobiles
- Replaces Dayco - XTX5053, XTX5054
- Replaces Polaris - 3211165, 3211177
- Length: 1143mm [45.01"]
- Width: 36mm [1.43"]
- High Performance Neoprene with Carbon Tensile Cords for Optimal Power Transmission and Increased Side Load Resistance
Fits the following Polaris snowmobile models:
- Polaris 2015 - 2016 600 Rush Pro-S
- Polaris 2017 - 2018 600 Rush Pro-S AXYS
- Polaris 2017 - 2018 600 Rush XCR
- Polaris 2015 - 2018 600 Switchback Adventure
- Polaris 2018 600 Switchback Assault
- Polaris 2015 - 2017 600 Switchback Assault 144
- Polaris 2015 - 2018 600 Switchback Pro-S
- Polaris 2017 - 2018 600 Switchback SP
- Polaris 2018 600 Switchback XCR
- Polaris 2017 - 2018 600 Voyageur
- Polaris 2015 - 2016 800 Rush Pro-S
- Polaris 2017 - 2018 800 Rush Pro-S AXYS
- Polaris 2015 - 2016 800 Rush Pro-X
- Polaris 2017 - 2018 800 Rush Pro-X AXYS
- Polaris 2017 - 2018 800 Rush XCR
- Polaris 2016 - 2018 800 Switchback Adventure
- Polaris 2018 - 2019 800 Switchback Assault
- Polaris 2017 800 SWITCHBACK ASSAULT 144
- Polaris 2015 - 2019 800 Switchback Pro-S
- Polaris 2015 - 2018 800 Switchback Pro-X
- Polaris 2018 800 Switchback XCR
- Polaris 2018 800 Titan Adventure
- Polaris 2018 800 Titan SP
- Polaris 2018 800 Titan XC
Ensure the best performance and longest life from your G-Force belt. Follow these three steps when installing a new belt.
1. Install the Right Belt. Using a belt that’s even slightly different than the OE specs can affect performance – or stop you in your tracks.
2. Align and Clean. Align the clutches according to manufacturer’s specifications and clean the sheaves with a Scotch-Brite® pad. Remove old belt residue, glazing, oils and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.
3. Install and Break It In. Perform two heat cycles in 20 miles. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
