Gates CVT Drive Belt for CF Moto
This CVT drive belt fits CF Moto UTVs and Side-by-Sides.
Belt description:
- CVT (-Continuous Variable Transmission-)
- Napa G-Force - 40G3691 - Standard Version of 40C3691
- CF Moto UTVs and Side by Sides
- Replaces CF Moto 0800055000, 08000550000001
- Replaces Dayco XTX2261
- Replaces Napa / Gates 40G3691, 40C3691
- Length: 968mm (38.125 in)
- Width: 36mm (1.406 in)
- High Performance Neoprene with Carbon Tensile Cords for Optimal Power Transmission and Increased Side Load Resistance
Fits the following CF Moto models:
- 2013 - 2018 CForce 800 800cc
- 2014 Snyper 800 EX 800cc
- 2011 - 2013 Terralander 800 EFI 800cc
- 2014 Terralander 800 EPS 800cc
- 2014 Terralander 800 WT 800cc
- 2014 Tracker 800 EFI 800cc
- 2013 UForce 600 594cc
- 2013 - 2017 UForce 800 800cc
- 2012 - 2013 X8 800cc
- 2016 - 2018 ZForce 800 800cc
- 2014 - 2015 ZForce 800 53 800cc
- 2014 - 2017 ZForce 800 EX 800cc
The fastest way to ruin your new powersport drive belt is to simply install it. If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersport belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all.
Ensure the best performance and longest life from your G-Force belt. Follow these three steps when installing a new belt.
1. Install the Right Belt. Using a belt that’s even slightly different than the OE specs can affect performance – or stop you in your tracks.
2. Align and Clean. Align the clutches according to manufacturer’s specifications and clean the sheaves with a Scotch-Brite® pad. Remove old belt residue, glazing, oils and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.
3. Install and Break It In. Perform two heat cycles in 20 miles. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.