Gates CVT Drive Belt for Arctic Cat and Suzuki
This CVT drive belt fits Arctic Cat and Suzuki UTVs and Side-by-Sides.
Belt description:
- CVT [-Continuous Variable Transmission-]
- Napa G-Force - 43G3596 - Standard Version of 43G3596
- Arctic Cat and Suzuki UTVs and Side by Sides
- Replaces Arctic Cat 3403141
- Replaces Carlisle UA437
- Replaces Goodyear 36GBS945
- Replaces Napa / Gates 43G3596, 43C3596
- Replaces Prime Line 724008
- Replaces Suzuki 2760131G00
- Length: 943mm [37.125"]
- Width: 37mm [1.438"]
- High Performance Neoprene with Carbon Tensile Cords for Optimal Power Transmission and Increased Side Load Resistance
Fits the following Arctic Cat models:
- 2007 - 2008 700 EFI Automatic 695cc
- 2007 700 EFI Automatic LE 695cc
- 2008 700 EFI Automatic M4 695cc
- 2008 700 EFI Automatic TRV LE 695cc
- 2006 700 EFI SE 695cc
Fits the following Suzuki models:
- 2005 - 2007 King Quad 700 695cc
- 2008 - 2009 King Quad 750 722cc
- 2011 - 2016 King Quad 750 722cc
The fastest way to ruin your new powersport drive belt is to simply install it. If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersport belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all.
Ensure the best performance and longest life from your G-Force belt. Follow these three steps when installing a new belt.
1. Install the Right Belt. Using a belt that’s even slightly different than the OE specs can affect performance – or stop you in your tracks.
2. Align and Clean. Align the clutches according to manufacturer’s specifications and clean the sheaves with a Scotch-Brite® pad. Remove old belt residue, glazing, oils and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.
3. Install and Break It In. Perform two heat cycles in 20 miles. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
