Heavy Duty Drive Belt for Yamaha Rhino 700 - Gates / Napa G-Force 26G3596

Gates CVT Drive Belt for Yamaha

This CVT drive belt fits Yamaha UTVs and Side-by-Sides. 

Belt description:

• CVT (-Continuous Variable Transmission-)
• Napa G-Force - 26G3596 -  Standard Version of 26C3596
• Yamaha UTVs and Side by Sides
• Replaces Carlisle UA438
• Replaces Napa / Gates 26G3596, 26C3596
• Replaces Prime Line 724014
• Replaces Yamaha 5B41764100, 5B4176410000
• Length: 943mm (37.125 in)
  
• Width: 32mm (1.25 in)
  
• High Performance Neoprene with Carbon Tensile Cords for Optimal Power Transmission and Increased Side Load Resistance

Fits the following Yamaha models:

• 2008 - 2011     Rhino 700 Automatic  686cc
• 2012 - 2013     Rhino 700 FI Auto 4x4  686cc

The fastest way to ruin your new powersport drive belt is to simply install it. If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersport belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all.

Ensure the best performance and longest life from your G-Force belt. Follow these three steps when installing a new belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specs can affect performance – or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer’s specifications and clean the sheaves with a Scotch-Brite® pad. Remove old belt residue, glazing, oils and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles in 20 miles. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.