Same Day Shipping On Orders Before 3PM, M-F.

NAPA  |  SKU: Belt 6272-13G3218

Heavy Duty Drive Belt for Arctic Cat, Suzuki - Gates / Napa G-Force 13G3218

$ 99.95

If you order before 3:00 pm CST, Monday thru Friday, your order goes out the same day.  Buy now!

Gates CVT Drive Belt for Arctic Cat and Suzuki

This CVT drive belt fits Arctic Cat and Suzuki UTVs and Side-by-Sides. 

Belt description:

  • CVT (-Continuous Variable Transmission-)
  • Napa G-Force - 13G3218 -  Standard Version of 13C3218
  • Suzuki UTVs and Side by Sides
  • Replaces Arctico 3402664
  • Replaces Carlisle UA400
  • Replaces Dayco HP2000, XTX2240
  • Replaces Goodyear 30GBS843
  • Replaces Napa / Gates 13G3218, 13C3218
  • Replaces Prime Line 724010
  • Replaces Suzuki K590110003
  • Length: 848mm (33.375 in)
  • Width: 29mm (1.125 in)
  • High Performance Neoprene with Carbon Tensile Cords for Optimal Power Transmission and Increased Side Load Resistance

Fits the following Arctic Cat models:

  • 2002             375 Automatic  376cc
  • 2003 - 2008  400 Automatic  376cc
  • 2003 - 2004  400 Automatic ACT  376cc
  • 2005 - 2007  400 Automatic LE  376cc
  • 2003 - 2004  400 Automatic MRP  376cc
  • 2004 - 2006  400 Automatic TBX  376cc
  • 2006 - 2007  400 Automatic TRV  376cc
  • 2005 - 2006  400 Automatic VP  376cc
  • 2005             400 DVX  398cc

Fits the following Suzuki models:

  • 2004 - 2005  Twin Peaks 700  697cc 

The fastest way to ruin your new powersport drive belt is to simply install it. If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersport belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all.

Ensure the best performance and longest life from your G-Force belt. Follow these three steps when installing a new belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specs can affect performance – or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer’s specifications and clean the sheaves with a Scotch-Brite® pad. Remove old belt residue, glazing, oils and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles in 20 miles. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.

    Payment methods

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa